Set Up The Resets; Advanced Setups; Set Up The Auto Recording - Delta DPM-C530 Operation Manual

Multi-function power meter
Table of Contents

Advertisement

DP M- C5 3 0 O p er at i on Ma n ua l

4.2.8 Set up the Resets

There are seven types of supported resets, including Default, Energy, Demand, Alarm, MaxMin, Data Log, and
ClearAll.
Default: Restore all the settings back to the defaults.
Energy: Reset all the accumulated energy values and automatic energy values.
Demand: Clear the current demand, power factor demand, recorded time and date.
Alarm: Clear all the detected alarm logs.
MaxMin: Clear all maximum values and minimum value logs.
Data Log: Clear the data log stored in the memory.
Clear All: Restore all the settings back to the defaults and clear all logs.
Set up Steps
1.
Press MENU to display the setting menu.
_4
2.
Select 0 and press ENTER to enter the Setup menu.
3.
Select 8 and press ENTER to enter the Reset menu.
4.
Select the item to set up and then press ENTER.
5.
After you select the option, use UP and DOWN to select the setting and then press ENTER to save
the setting.
6.
Repeat steps 4–5 until you complete the settings. Press ENTER to save the setting or press MENU
to cancel without saving the changes.
7.
Press MENU to go back to the setting menu.

4.3 Advanced Setups

4.3.1 Set up the Auto Recording

Energy 1: Disable this function to restart auto-recording the group 1 energy value continuously; options
are Enable and Disable (default).
Auto Day 1: Set the date to conclude the monthly accumulated energy value; options are 1–31; 0 is
default.
Energy 2: Enable this function to restart auto-recording the group 1 energy value continuously; options
are Enable and Disable (default).
Auto Day 2: Set the date to conclude the monthly accumulated energy value; options are 1–31; 0 is
default.
Set up Steps
1.
Press MENU to display the setting menu.
2.
Use UP and DOWN to select item 11 on the second page and then press ENTER to enter the
Advanced menu.
3.
Use UP and DOWN to select item 2 Auto Recording and press ENTER.
4.
After you select the option, use UP and DOWN to select the setting and then press ENTER to save
4 - 8

Advertisement

Table of Contents
loading

Table of Contents