Approved Copy TABLE OF CONTENTS STANDARD FEATURES SAFEGUARDS GROUNDING/EARTHING OPERATION LED INDICATIONS FCC NOTICE SPECIFICATIONS LIMITED WARRANTY...
• Full InterActive technology including six simultaneous charge termination systems, Balance and Rejuvenation modes, and Simply plug the CINE VCLX Charger into the CINE VCLX (CA) battery LifeSaver Maintenance mode. via the CA-GBC cable. As with all Anton/Bauer chargers, charging is automatic.
10 ¼ x 2 ¼ x 8 ½ under average operating conditions. Weight: 4.2 lbs 3. Stage Three charging is the Anton/Bauer exclusive Lifesaver maintenance mode. This patented pulse routine keeps batteries fully Input Voltage: 100-240 VAC, 50-60 Hz charged, free from self-discharge – indefinitely – without damaging heat associated with so-called “trickle charge”.
Support Center or to the address above. Upon receipt of the Product and a record of your compliance with the conditions of this warranty, Anton/Bauer will repair or replace the Product and return it to you, or issue a credit, as applicable.
Page 6
Approved Copy The following are trademarks of Anton/Bauer, Inc.: Anton/Bauer, Anton/Bauer logo and parallelogram design, Aspekt, Automatique, DataTap, DIONIC, Elipz, Egripz, Elightz, Essentialz, Gold Mount, HubZ, HyTRON, Impac, Interactive and design, LifeSaver, Logic Series, Logic Series Logo, Maxx man logo design, Nexus, PowerStrap, Proformer, Probe, ProPac, RealTime, Satellight, Snap-On, Stasis, Stasis Flex, Tandem, TrimPac, Ultrakit, Ultralight, “One World.
Need help?
Do you have a question about the CINE VCLX and is the answer not in the manual?
Questions and answers