Table of Contents
Advertisement
ASW-WP Installation Guide
Device Power
The ASW-WP supports [2] types of power input: PoE and rear panel input. When using PoE, a
compatible HDBaseT receiver can power the ASW-WP by inserting power onto the twisted pair
cable. When using a compatible receiver (such as the DIGI-HD60C-R), there is no need to use
the rear panel power input. If using a different receiver that does not supply power (such as
the DIGI-HD70-R) you must connect power to the rear power input. Using this method, a 5vDC
2a power supply should be used (such as the PS-5D-20TL).
RS232
The ASW-WP can be controlled by RS232
by connecting to a computer's serial port
rd
or 3
party control system. The diagram
below
shows
an
example
of
this
application:
Alternatively –
the ASW-WP
can
be
programmed to control the display via
RS232; more about this feature on p. 17.
Connections for this method would be as
shown in this diagram:
9
Advertisement
Table of Contents
