progeo YOGA User Manual page 37

Fig. 64
Position of the one-piece footplate
If requested on the order form the one-piece carbon fiber footplate
can be mounted in two different positions: completely internal
(fig.65) or completely external (fig.66). These configurations
exclusively depend on how the parts are assembled. When raised,
this footrest can be rotated by 180° (fig.67) so as to reduce the
encumbrance if, for normal use, is set as completely external
Fig. 65 Fig. 66
One piece flip-up aluminium footplate
The flip-up system, the
engaging system and
the
adjustment
footplate (figure 68) are
exactly the same as
the
footplate
explained above.
Position of the one piece footplate
If requested on the order form the one-piece aluminium footplate can
be mounted in four different positions:
and 69), 2/3 internal (figure 70), 2/3 external (figure 71), completely
external (figure 72).
how the parts are
Fig. 69
Fig. 67
inclination
for this
carbon fiber
just
Fig. 68
These configurations exclusively depend on
assembled.
Fig. 70 Fig. 71
When the position of the footrest is changed, check
carefully that, when rotating, the front wheels do not
touch the footrest
completely internal (figure 68
Fig. 72
YOGA 37