Boot; Save & Exit - Nexcom NIFE 200 User Manual

Chapter 4: BIOS Setup

Boot

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset Security
Boot Configuration
Bootup NumLock State [On]
Fast Boot [Disabled]
Boot Option Priorities
Boot Option #1 [UEFI: Built-in EFI . . .]
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Fast Boot
When enabled, the BIOS will shorten or skip some check items during POST.
This will decrease the time needed to boot the system.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Select the keyboard NumLock
state
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Save & Exit
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
67
Security Boot Save & Exit
Reset the system after saving
the changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NIFE 200 Series User Manual