Data Flow And Operation Options - Data Translation DT9828 User Manual

Data Flow and Operation Options

DT9828
Single-Value Operation Support
SupportsSingleValue
Simultaneous Single-Value Output
Operations
SupportsSetSingleValues
Continuous Operation Support
SupportsContinuous
Continuous Operation until Trigger
SupportsContinuousPreTrigger
Continuous Operation before & after Trigger
SupportsContinuousPrePostTrigger
Waveform Operations Using FIFO Only
SupportsWaveformModeOnly
Simultaneous Start List Support
SupportsSimultaneousStart
Supports Programmable Synchronization
Modes
SupportsSynchronization
Synchronization Modes
SynchronizationMode
Interrupt Support
SupportsInterruptOnChange
FIFO Size, in kBytes
FifoSize
Muting and Unmuting the Output Voltage
SupportsMute
Auto-Calibrate Support
SupportsAutoCalibrate
a. The DIN subsystem supports continuous mode by allowing you to read the digital input port (all 4 digital
input lines) using the analog input channel list.
b. The input FIFO size is 1 kBytes or 1024 samples.
Table 4: Data Flow and Operation Options
A/D D/A
Yes
Yes
b
1
Supported Device Driver Capabilities
DIN DOUT C/T
Yes Yes
a
Yes
TACH QUAD
71