3. For the Data Reduction Method, select Max so that the maximum value of the most recent
buffer is displayed for each channel.
4. Leave the default values for the remaining parameters:
− Precision = 2
− Columns = 8
− Display Update rate = middle of slider bar
Configure the Appearance of the Statistics Window
Configure the appearance of the Statistics window as follows:
1. Ensure that the Visible Statistics column in the Plot and Data Config window is checked
for both channels:
2. If desired, hide the Plot and Data Config window by clicking the Auto-Hide pin (
the top, right corner of the window.
Position the Windows
If you want see the data that is displayed in the Channel Display, Channel Plot, and Statistics
windows at once, you need to move the windows to different locations in the display area.
In the following example, the Channel Display window is located at the top of the display
area, the Channel Plot window is located in the middle of the display area, and the Statistics
window is located at the bottom of the display area:
Verifying the Operation of a Module
) in
51