Table of Contents
Advertisement
4.
Check condition of gasket (1).
5.
Replace gasket (1) if damaged.
6.
Place gasket (1) in correct position on cylin-
der head.
7.
Push spade lugs under the terminals on the injector and tighten to specified torque using a torque wrench.
Name
Nut
8.
Install cylinder head cover (2) with screws (4) and washer (3).
Final steps
1.
Connect wiring harness.
2.
Close wiring harness safety clips on cylinder head cover.
Size
Type
M4
Tightening torque
Lubricant
(Engine oil)
MS15054/03E 2018-07 | Valve Drive | 125
Value/Standard
1.5 Nm ±0.25 Nm
Hide quick links:
Advertisement
Table of Contents
