MTU 12V2000Gx6 series Operating Instructions Manual page 128

WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
Preparatory steps
1. Close fuel supply line.
2. Remove cylinder head cover (→ Page 124).
Removing pressure pipe neck
1. Remove HP fuel line (1).
2. Unscrew union nut (2).
3. Pull off pressure pipe neck (3).
4. Extract fuel from the exposed bores using the
suction device.
Removing injector
1. Remove screw (3).
2. Take off hold-down clamp (2).
3. Use the puller to pull out injector (1).
4. After removal, seal all openings with suitable
covers.
128 | Injector | MS15054/03E 2018-07