MTU 12V2000Gx6 series Operating Instructions Manual page 130

8. Coat thread and shoulder of union nut (2) with engine oil and tighten to specified torque using a torque
wrench.
Name
Union nut
9. Tighten screw (3) for hold-down clamp (2) to specified torque using a torque wrench.
Name
Screw
10. Tighten union nut (2) on pressure pipe neck (3) to specified torque using a torque wrench.
Name
Union nut
130 | Injector | MS15054/03E 2018-07
Size Type
M24 Preload torque
Size Type
M8 Tightening torque
Size Type
M24 Tightening torque
Lubricant Value/Standard
(Engine oil) 15 Nm +5 Nm
Lubricant Value/Standard
(Engine oil) 40 Nm +4 Nm
Lubricant Value/Standard
50 Nm +5 Nm