IBM AS/400e User Handbook Manual page 773

Note 1: CPW is the Commercial Processing Workload that is now being used to measure the performance of all
AS/400 processors. The CPW value is measured on maximum configurations. The type and number of disk
devices, the number of workstation controllers, the amount of memory, the system model, other factors, and
the application being run determine the performance that is achievable. All AS/400 processors announced
from September 1996 onward have only CPW performance measurements.
Note 2: This total includes the MFIOP. The combination of internal and external IOPs cannot exceed this number.
Note 3: The maximum combination of 2440, 7208 or 9348 and Tape Libraries may not exceed four.
Note 4: Processor Group is determined by a combination of the Processor and Interactive Feature. The following
table provides a cross reference.
Processor
#2069
#2070
Note 5: The system maximum for internal tapes and CD-ROMs is 18.
Summary of All Earlier AS/400 Models
Interactive Feature
#1514
#1510
#1511
#1512
#1514
#1510
#1511
#1512
#1513
Summary of All Earlier AS/400 Models
Processor Group
P40
P50
P50
P50
P40
P50
P50
P50
P50
743