IBM AS/400e User Handbook Manual page 330

Hide thumbs Also See for AS/400e:

Table of Contents

PCI Card Placement Rules

3,4 IOP/IOA/INS

The following features still need to be added to the system:

• Three #2843 PCI IOPs

• #5074 PCI Expansion Tower with base #9943 IOP

• Six #4746 PCI Twinax Workstation IOAs (provides attachment for 240 Twinax device

addresses, including the twinax console)

• One #4748 PCI RAID Disk Unit Controllers (provides attachment Disk Units and

RAID-5 capability)

• Two #4838 PCI 100/10 Mbps Ethernet IOAs (provides attachment to 100 Mbps

Ethernet segments)

• One #2749 Ultra Magnetic Media IOAs (provides attachment of the remaining

7208-342 tape unit)

Examining the card enclosure shown above, slots C02 and C01 are empty. This is a perfect

place for a #4838 and the IOP to control it. The procedure doesn't need to be used because a

simple examination of the entries for the #2843 in "IOP Capacity Table" on page 285, and the

#4838 in "Hard Rules: IOA Capabilities" on page 286, shows there is ample capacity in the

#2843 to support the #4838. After installing the #2843 and #4838, the Model 820 card

enclosure will appear as shown in the following figure.

AS/400e System Handbook

Show Quick Links

Table of Contents