Cd-Rom; Internal Cd-Rom Drives; Lpar Support And Cd-Rom - IBM AS/400e User Handbook Manual

Internal Magnetic Media
Tape tensioning control improvements in the tape unit eliminate the need for an
auto-retension pass during the data cartridge load sequence. This is a major time saving
since the auto-retension pass on earlier QIC tape units can take up to five minutes. The
#6386 Tape Unit retensions the date cartridge only when a loss of tension is detected. For
typical operating conditions, this should be very infrequent.
It may be used for save/restore, Alternate IPL, program distribution, migration, and QIC
cartridge tape exchange.
#6490 7 GB 8mm Cartridge Tape Unit
Can be used for save/restore, Alternate IPL, migration, and 8mm cartridge tape exchange
using appropriate media and density.

CD-ROM

Internal CD-ROM Drives

AS/400e server code is distributed on CD-ROM media. One CD-ROM drive is required on all
270 and 8xx models and must be ordered as a separate feature on the system unit. It can
also be used for Alternate IPL but not as a save/restore device for the system.

LPAR Support and CD-ROM

For information pertaining to LPAR and CD-ROM feature requirements, see
http://www.as400.ibm.com/lpar
#4425 CD-ROM
The #4425 is a feature CD-ROM device that can be mounted in the system unit of Models
830, 840, SB2, and SB3 and in the #5074/#5079 PCI Expansion Towers.
The #4425 is used for Alternate IPL (IBM distributed CD-ROM media only) and program
distribution.
This is a CIF.
#4525 CD-ROM
The #4525 is a feature CD-ROM that can be mounted in the system unit of Models 270 and
820.
The #4525 can be used for Alternate IPL (IBM distributed CD-ROM media only) and program
distribution.
This is a CIF.
355
Internal Magnetic Media