IBM AS/400e User Handbook Manual page 321

IOA
#4745 PCI Two-Line WAN IOA
#9771 Base PCI Two-Line WAN
8
with Modem
#2743 PCI 1Gbps Ethernet
7, 11
IOA
#2744 100 Mbps PCI Token Ring
7
IOA
#4723 PCI 10Mbps Ethernet IOA
#4746 PCI Twinaxial Workstation
11
IOA
#4838 PCI 100/10Mbps Ethernet
7
IOA
#4815/#4816/#4818PCI
155Mbps
ATM
7, 10
IOA
Notes:
1. One High Speed Line is allowed per IOP. If there is a need to support more than one high
speed line, the "Configuration Validation Procedure" on page 283 should be used to
determine if enough memory and performance capacity is available on the IOP to support
more lines. The following are defined as High Speed Lines:
• Synchronous PPP above 64 Kbps to 2048 Kbps
• SDLC above 64 Kbps to 2048 Kbps
• Frame Relay above 64 Kbps to 2048 Kbps
• X.25 above 64 Kbps to 640 Kbps
Line speeds greater than 64 Kbps have the following restrictions:
Capability/Comment
X.25 up to 32 virtual circuits and
2, 3
line speed up to 64 Kbps
X.25 up to 64 virtual circuits and
2, 3
line speed up to 64 Kbps
X.25 up to 32 virtual circuits and
1, 2, 3
line speed up to 640 Kbps
X.25 up to 64 virtual circuits and
1, 2, 3
line speed up to 640 Kbps
X.25 up to 256 virtual circuits and
1, 2, 3
line speed up to 640 Kbps
10
IPX Not Supported
5
IPX
5
IPX
Maximum Addresses and
9
sessions
5
IPX
6
Up to two emulated LANs
PCI Card Placement Rules
Memory Performance
(per port) (per port)
8 7
11 7
8 15
12 15
35 15
- -
31 72
31 24
- -
31 72
89 47
PCI Card Placement Rules
291