IBM AS/400e User Handbook Manual page 333

Hide thumbs Also See for AS/400e:

Table of Contents

The following features still need to be added to the system:

• One #2843 PCI IOPs

• #5074 PCI Expansion Tower with base #9943 IOP

• Three #4746 PCI Twinax Workstation IOAs (provides attachment for Twinax device

• One #4748 PCI RAID Disk Unit Controllers (provides attachment Disk Units and

RAID-5 capability)

• One #4838 PCI 100/10 Mbps Ethernet IOAs (provides attachment to 100 Mbps

Ethernet segment)

At this point, the Model 820 processor cannot support any more cards so the remaining cards

have to be placed in the #5074 Expansion Tower. Since a separate IOP is needed for the

#4838 and there is a limit to the number of IOAs in the first Multi-Adapter Bridge in the #5074,

the #4838 will be placed on the #9943 Base IOP in the #5074. As demonstrated earlier, there

is more than enough capacity on the #2843/#9943 for the #4838, the complete validation

procedure will not be used. After installation, the configuration will appear as shown in the

following figure.

PCI Card Placement Rules

Show Quick Links

Table of Contents