Card Technology - IBM AS/400e User Handbook Manual

AS/400e server SB2
– Provides support for base Console/Workstation IOA
The configurator will determine which feature combinations will be on the order based
on the System Console specify—#5540 or #5544
The following required features must be ordered:
• Processor
#2315 Model SB2 8-way Processor (IStar) (CCIN 2315)
• Integrated Disk Units
Device Parity Protection: All (0041) is the default for disk data protection but may be
removed from the order. Select four of the following disk units. If four 17.54 GB disk units
are selected, then RAID or mirroring must also be selected to meet the maximum logical
DASD capacity limit.
– #4314 - 8.58 GB Disk Unit
– #4317 - 8.58 GB 10k RPM Disk Unit
– #4318 - 17.54 GB 10k RPM Disk Unit
– #4324 - 17.54 GB Disk Unit
• Integrated CD-ROM
– #4425 - CD-ROM
• System Console/Communications Adapter
– #5540 System Console on twinaxial workstation controller
• #4746 PCI Twinaxial IOA
• #9771 Base PCI 2-Line WAN with Modem
– #5544 System Console on Operations Console
• #0367 Operations Console PCI Cable
• #4745 PCI Two Line WAN IOA
• #9771 Base PCI 2-Line WAN with Modem
The server SB2 is a Customer Setup system. Refer to "Customer Install Features (CIF)" on
page 229.

Card Technology

The new hardware completes the transition to PCI I/O architecture with the introduction of
PCI architecture in all the 8xx servers. This I/O structure enables customer setup of selected
features on the SB2. It also enables Hot Plug PCI for adding and replacing hardware without
taking the server down.
194
AS/400e System Handbook