Cleaning And Lubricating The Screen Print Head; Cleaning And Lubricating The Board Positioning And Lift 1 - Panasonic SP22P Maintenance Manual

1-5-1

Cleaning and Lubricating the Screen Print Head

This unit drives the squeegee axis and print.
Squeegee axis linear bearing
1937C2AA
1-5-2

Cleaning and Lubricating the Board Positioning and Lift 1

This unit is for holding the board.
18A5C2AA
193C-E-MMA01-A05-00
Squeegee axis ball screw
Linear bearing for clamp
Screws
Cover
Check Every 560 Hours (Once a Week)
1.
Clean and lubricate the linear bearing
and ball screw.
[Oil : ALBANIA 2]
1. Squeegee axis linear bearing
Lubricate to the sliding unit.
2. Squeegee axis ball screw
Apply grease to the squeegee axis ball screw.
1.
Remove the cover.
∗ Loosen the screw.
2.
Clean and lubricate the linear bearing.
[Oil : ALBANIA 2]
1.Linear bearing for clamp
Apply grease to the rail.
1
Page 1-21