Panasonic SP22P Maintenance Manual page 121

Q
θ shaft (+) over run error .................................. 4-6
θ shaft (-) over run error ................................... 4-6
R
R conv. board transport error ................... 4-4, 4-6
R squeegee down error ................................... 4-6
R squeegee up timeout .................................... 4-5
Returning to origin error ......................... 4-7, 4-15
Right conveyor width adjustment timeout ........ 4-5
S
Safety relay ...................................................... 4-3
Servo switch ............................................. 4-3, 4-9
Solder detection (Mask) ................................... 4-4
Solder detection (Syringe) ............................... 4-4
Squeegee angle ............................................... 4-3
Squeegee holder close .................................... 4-5
Squeegee open ................................................ 4-3
T
Temperature sensor ............................... 4-3, 4-12
The input and output check of machine ......... 4-27
Thermal trip detection ............................ 4-3, 4-11
U
Under axis brake off ............................... 4-3, 4-13
Under guard shaft brake off ............................. 4-6
V
Valve list (VL) ................................................. 4-25
W
Width adjust error ............................................. 4-5
193C-E-MMA0Z-A01-00
Page 3