Resetting The Smf6120 To Delivery Status - Siemens FDCW221 Technical Manual

6.8 Resetting the SMF6120 to delivery status

Building Technologies
Fire Safety
NOTICE
Resetting the manual call point with radio base to delivery status
All existing configurations are deleted.
● Only reset the radio smoke detector to its delivery status if the existing
configurations can be deleted.
● Ensure that no gateway is in configuration mode during the reset process.
Exception: The reset radio device should be logged back on to the gateway
immediately.
1 2
Figure 5: View inside manual call point SMF121
1 Reset slider
Commissioning
Resetting the SMF6120 to delivery status
2 Alarm button
6
65 | 82
009865_m_en_--
2015-11-06