About This Document - Siemens FDCW221 Technical Manual

1 About this document

Target group
Product Manager
Project Manager
Project engineer
Installation personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes the devices
● Radio gateway FDCW221
● DOW1171 radio smoke detector
● Manual call point SMF121
● Radio base SMF6120
and how to integrate the devices into the fire detection system FDnet.
It contains all the information you'll need about setup, functions, planning,
mounting, and commissioning.
The SMF6120 radio base may only be used as a replacement device in fire
detection installations that were installed prior to April 1, 2011!
Target groups
The information in this document is intended for the following target groups:
Activity
● Is responsible for information
passing between the manufacturer
and regional company.
● Coordinates the flow of information
between the individual groups of
people involved in a project.
● Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
● Provides the information required to
run the project.
● Sets parameters for product
depending on specific national
and/or customer requirements.
● Checks operability and approves
the product for commissioning at the
place of installation.
● Is responsible for troubleshooting.
● Assembles and installs the product
components at the place of
installation.
● Carries out a performance check
following installation.
● Carries out all maintenance work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
About this document
Applicable documents
Qualification
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for Product Managers.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for Project Managers.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for Product Engineer.
● Has received specialist training in
the area of building installation
technology or electrical installations.
● Has obtained suitable specialist
training for the function and for the
products.
1
7 | 82
009865_m_en_--
2015-11-06