Figure 96. Rebalancing Local Ports on Both Storage Controllers
When the join process completes, the Time Settings page opens.
If the join process fails to complete, a prejoin error page opens.
Figure 97. Joining Process Failed
To manually add the bottom storage controller, click Manually Add Controller.
Related links
Joining Storage Controller Modules Manually
Joining Storage Controllers Manually
If the storage controllers fail to join automatically, use the Add Controller page to join the bottom
storage controller to the top storage controller.
1.
If the IPv6 address settings for the top storage controller are not configured, a page is displayed on
which you can configure the IPv6 addresses.
Set up Storage Center Software
115