Ifp Reservoir Service - SRAM RockShox Super Deluxe Service Manual

2 0 0 H o u r S e r v i c e
When replacing seals and o-rings, use your fingers or a pick to remove
the seal or o-ring. Spray isopropyl alcohol on each part and clean with
a rag. Apply grease to the new seal or o-ring. Only use RockShox®
Dynamic Seal Grease when servicing RockShox shocks.
To prevent damage to the shock use aluminum soft jaws and position
the eyelet in the vise so that the adjustment knobs are clear of the
vise jaws. For bearing mount shocks, wrap a rag around the eyelet,
then clamp the eyelet flat into the vise.
Inspect each part for scratches. Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
RTR: Remove the remote screw and the cable spool.
1
Loosen the cable hanger screw and remove the cable hanger.
I F P R e s e r v o i r S e r v i c e
NOTI CE
T10 TORX®
2 mm

IFP Reservoir Service

28