SRAM RockShox Super Deluxe Service Manual page 48

Push the new retaining ring into the groove until it is seated.
27
⚠ CAUTIO N- E YE HAZARD
The retention ring can eject rapidly as it is installed.
Wear safety glasses.
Pull up on the IFP reservoir cap to seat it against the retaining ring.
28
Reinstall the Schrader valve into the IFP reservoir cap.
29
Install the RockShox® air valve adaptor tool onto the shock pump and
30
thread the adaptor tool into the reservoir air valve. Inflate the reservoir
to 250 psi.
Remove the adaptor tool and pump from the reservoir.
Separating the pump from the adapter first will allow all of the air to
escape from the reservoir.
You may substitute nitrogen if you have the proper fill equipment.
Schrader valve core tool
RockShox Air Valve Adapter Tool and shock pump
Shock Assembly and Bleed
250 psi
48