6.
Compressor
WARNING: Recover refrigerant from the refrigerant circuit before remove the compressor.
Note: Remove the panel plate, electrical parts, and fan assembly (refer to 1. Panel plate, 2. Electrical parts,
and 3. Fan assembly) before disassembling compressor.
Procedure
1) Remove the flange nut of terminal cover
and remove the terminal cover (see CJ_
ODU_INV_008 ).
2) Disconnect the connectors (see CJ_ODU_
INV_009 ).
Note: This section is for reference only. Actual unit appearance may vary.
Page 46
Illustration
Terminal Cover
CJ_ODU_INV_008
CJ_ODU_INV_009