Carrier 42QHP09E8S Service Manual page 39

4. Fan motor and fan
Note: Remove the front panel, electrical parts and evaporator (refer to 1. Front panel, 2. Electrical parts, and
3. Evaporator). before disassembling fan motor and fan.
Procedure
1) Remove the two screws and remove the
fixing board of the fan motor (see CJ_OP_
INV_018).
2) Remove the bearing sleeve(see CJ_OP_
INV_019).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
CJ_OP_INV_018
CJ_OP_INV_019
Screws
 Page 35 