Carrier 42QHP09E8S Service Manual page 41

5. Step motor
Note: Remove the front panel and electrical parts (refer to 1. Front panel, 2. Electrical parts) before
disassembling step motor.
Procedure
1) Remove the two screws, then remove the
stepping motor (see CJ_OP_INV_021).
6. INTELLIGENT EYE
Note: Remove the front panel and electrical parts (refer to 1. Front panel, 2. Electrical parts, 3. Evaporator
and 4. Fan motor and fan) before disassembling step motor.
Procedure
1) Remove the 1 screw, then remove the
intelligent eye. (see CJ_OP_INV_021).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Stepping Motor
CJ_OP_INV_021
Illustration
Intelligent Eye
CJ_OP_INV_021
 Page 37 