SMA CLUSTER CONTROLLER User Manual page 61

SMA Solar Technology AG
• Select the desired SMA Modbus profile and select [Open].
☑ The file name of the SMA Modbus profile is displayed in the field Update SMA
Modbus profile (*.xml).
• Select [Refresh].
5. To update the user-defined Modbus profile, perform the following steps:
• In the field Update user-defined Modbus profile (*.xml), select [Browse...].
☑ The file selection window opens.
• Select the desired Modbus profile and select [Open].
☑ The file name of the user-defined Modbus profile is displayed in the field Update
user-defined Modbus profile (*.xml).
• Select [Refresh].
Saving the System Configuration
1. Select the Cluster Controller in the system tree and select the menu Update and save in the
device menu.
2. Select the parameter group Modbus.
3. To save the automatically created system configuration, select [Save automatically
generated system configuration (sysplant.xml)].
4. To save the user-defined system configuration file, select [Save user-defined system
configuration (usrplant.xml)].
Updating the System Configuration
1. Log into the Cluster Controller as Installer.
2. Select the Cluster Controller in the system tree and select the menu Update and save in the
device menu.
3. Select the parameter group Modbus.
4. In the field Update user-defined system configuration (*.xml), select [Browse...].
☑ The file selection window opens.
5. Select the desired system configuration file and select [Open].
☑ The file name of the system configuration file is displayed in the field Update user-
defined system configuration (*.xml).
6. Select [Update].
User Manual
12 Modbus Configuration
ClusterController-BA-en-15 61