SMA CLUSTER CONTROLLER User Manual page 101

SMA Solar Technology AG
Events and Device Status
Problem
In the event log, the wrench symbol
( ) is displayed next to the event
type.
In the event log, the telephone re-
ceiver symbol ( ) is displayed
next to the event type.
At least one device has the status
Warning or Error.
User Manual
Cause and corrective measure
This event can only be rectified by a user with "Installer"
rights.
Corrective measures:
• Contact the user with "Installer" rights and inform them of
the serial number of the device and the event number.
This event can only be rectified by SMA Service.
Corrective measures:
• Contact the user with "Installer" rights and inform them of
the serial number of the device and the event number.
The user with "Installer" rights contacts the Service (see
Section 20, page 111).
There may be a disturbance in the device.
Corrective measures:
• Check the Cluster Controller event log (see Section 9.1,
page 51).
• Refer to the device documentation.
18 Troubleshooting
ClusterController-BA-en-15 101