Finishing Edges; Sewing Double Overlock - Bernina 435 Instruction Manual

6.11 Finishing edges

The Zig zag No. 2 is suitable for all materials. It can also be used for elastic seams as well as for decorative
sewing. Use darning thread for fine materials. When sewing satin stitch, it is recommended to select a dense,
short the zig zag with a stitch length of 0.5 – 0.7 mm. The satin stitch can be used for appliqué and for
embroidering.
Prerequisite:
• The edge of the fabric should lie flat and not roll.
> Attach the Reverse pattern foot No. 1.
> Touch the icon «Practical stitches».
> Select the Zig zag No. 2.
> Neither select too wide a stitch nor too long a stitch.
> Guide the edge of the fabric into the center of the presser foot, so that the needle goes into the fabric
on one side and over the edge into the air on the other side.

6.12 Sewing Double overlock

A double overlock seam is suitable for loose knitware and cross seams in knits. When working with knitware,
a new jersey needle should be used to prevent damaging the delicate stitches. When sewing elastic
materials, use a stretch needle.
Practical stitches
81