Bernina 435 Instruction Manual page 114

Message on the display
No BERNINA USB stick is inserted.
Make sure that during the
complete automatic update
always the same BERNINA USB
stick remains inserted.
The update of the software has
failed.
It is time for the regular
maintenance. Please contact your
specialzed BERNINA dealer to
make an appointment.
Cause
The BERNINA USB stick (optional
accessory) is not inserted.
The latest software version
cannot be found on the USB
stick.
The machine needs cleaning/
lubricating.
The machine needs maintenance.
The message appears after the
programmed service interval has
expired.
Important information: Having
your machine cleaned and
serviced properly at the
appropriate times ensures its
proper functioning and a long
service life. Failure to do so may
adversely affect service life and
limit the guarantee. The charge
for servicing is nationally
regulated – consult your dealer or
servicing shop for more details.
Repair
> Use a BERNINA USB stick (optional accessory) providing
enough free capacity.
> Make sure that the data for the software update has
been unzipped.
> Check whether the data for the software update are
saved directly on the data medium and not in a file on
the USB stick.
> Update the software.
> Clean the machine.
> Lubricate the hook.
Important information on lubricating: Too much oil can
pollute the fabric and the thread.
> After lubricating, embroider a test piece first.
> Contact the specialized BERNINA dealer.
> Delete the message temporarily by touching the icon
«ESC».
Having cleared the message three times, the message will
appear as recently as the next service interval has been
completed.
Attachment
115