Bernina 435 Instruction Manual page 112

Fault
Speed too low
The machine doesn't start
Error during software update
Cause
Unfavorable room temperature.
Settings in the Setup Program.
Unfavorable room temperature.
The machine is damaged.
USB stick is not recognized.
The update process is blocked
and the hourglass on the display
is inactive.
Date of the software update
cannot be found.
Repair
> Place the machine in a warm room one hour before use.
> Adjust the sewing speed in the Setup Program.
> Adjust the slide.
> Place the machine in a warm room one hour before use.
> Connect the machine and switch it on.
> Contact the specialized BERNINA dealer.
> Use a BERNINA USB stick.
> Remove the USB stick.
> Switch the machine off.
> Switch the machine on.
> Follow the instruction on the display.
> Unzip the update data.
> Save data of the software update directly on the data
medium and not in a file on the USB stick.
Attachment
113