Login; Pressure Calibration - TECHCON SYSTEMS TS550R User Manual

6.2 Making Parameters Adjustment from the websever
Go back to the webserver site and click on the "Controllers" menu.
Click on the active controller link
The controller screen will be displayed in the webserver as shown below.
The controller parameters such as pressure and dispense time can be adjusted
from the webserver.
Click on the "Edit" icon
The parameter screen will appear as shown below:
26

5.1.1 Login

1. Touch the Login icon to enter the login screen
2. Enter "0000" in Password window
3. Touch the Check Mark icon to save and exit

5.1.2 Pressure Calibration

Note: Pressure calibration must be performed when the unit is activated for
the first time.
7