Dispensing; Pressure Adjustment; To Change Pressure Unit Display - TECHCON SYSTEMS TS550R User Manual

13. Go to any computer and open any web browser
http://localhost:8090/
14. Type in:
You are now in the webserver site. The below screen will be displayed:
15. Click the "Login" button
16. Enter "admin" in the Login box
17. Enter "1001" in the Password box
24
then press the enter button

5.2 DISPENSING

5.2.1 Pressure Adjustment

Note: Pressure in Port A and Port B delivers the same output pressure.
This pressure is to activate the valve. Make sure the supplied pressure is set
at least 70 psi (4.8 bar)
1. Touch the "Pressure A.B" icon to enter the pressure setup screen
2. Touch the Up and Down arrows to set valve activation pressure (70 psi
minimum)
3. Touch the Check Mark icon to save and exit

5.2.2 To Change Pressure Unit Display

Note: The default pressure unit is PSI. To change pressure unit to BAR,
follow the instructions below.
1. Touch the Setup icon to enter the setup screen
9