Stored Program In Memory Cell; To Store Dispense Parameters; To Run In Single Sequence Mode - TECHCON SYSTEMS TS550R User Manual

5.4 Stored Program in Memory cell

The unit has 50 memory cells to store all dispense parameters. The controller can
activate all memory cells in sequence mode.

5.4.1 To store dispense parameters

1. Touch the forward or backward arrow to select the
desired memory cell.
2. Enter all the desired dispense parameters then touch the
"Save" icon to save the data

5.4.2 To run in Single Sequence Mode

1. Touch the "Run Method" icon to enter sequence mode setup
14
5.7 To Connect to Wi-Fi network.
1. Connect the antenna to the Wi-Fi connector located in the back of the unit
2. Touch the Setup icon to enter the setup screen
3. Touch the Wi-Fi icon to enter the network setup screen
4. Touch the "Scan" tab to scan for all available networks
5. Touch the Up and Down arrows to select the desired network
19