CMA Dishmachines UC60e Quick Setup Instructions page 2

UC60e
Quick Setup
Instructions
WARNING: Electrical and plumbing
connections need to be made by
a qualified service person who will
comply with all available Federal, State
and Local Health, Electrical, Plumbing
and Safety codes.
CAUTION!
WATER SUPPLY MUST NOT
EXCEED 150 DEGREES.
"VAPOR"
OTHERWISE,
WILL CAUSE ELECTRONIC
COMPONENT DAMAGE!
STEP
5
1
2
00
3
START
To initially fill dishwasher with water, push and
hold the power button until water valve activates;
then release and the unit starts filling with water.
STEP
6
1
2
00
3
START
To start cycle press START button. To change cycle
press and hold START button for 5 seconds. Total
cycles 60/120/180/300 seconds.
00
STEP
7
00
To drain the dishwasher, turn the main power off; the light will turn orange. Open the front door and remove
the overflow drain-stopper. Press and hold the drain button for three seconds or until the drain pump
activates. Allow the dishwasher to drain; the unit will turn off when done. Note: do not drain the dishwasher
without the scrap screen in place.
1
2 00 00
3
START
1
2 00
00
3
START
800-854-6417
6
START
CYCLE SELECTION
LIGHTS
WASH TANK
TEMPERATURE
RINSE
TEMPERATURE
7
DRAIN
5
POWER
7
OVERFLOW TUBE
3-2016