Page 1
Owner’s Manual Keep with machine for reference MODEL UC50e & INSTALLATION OPERATION Rev 1.00 D I S T R I B U T E D E X C L U S I V E L Y B Y C M A D I S H M A C H I N E S...
The supply water to the UC50e must be a minimum of 140°F at 30 PSI (Pounds per Square Inch). If it is less than 30 PSI dynamic pressure a pressure pump must be installed to guarantee optimal machine operation.
Than keep manual drain button pressed until water tank is completely empty. During the wash/Rinse cycle, excess water will automatically be drained. MODEL UC50e INSTALLATION & OPERATION MANUAL Rev. 1.00 Page...
Insert the rack filled with dishes to wash. The plates must be correctly placed in the rack. • Select the wash cycle required by pressing Time Selector push button. MODEL UC50e INSTALLATION & OPERATION MANUAL Rev. 1.00 ON/OFF PUSH BUTTON CYCLE START PUSHBUTTON TIME SELECTOR PUSHBUTTON...
Do not use bleach or chlorine based detergents. • At the end of the day, it is advisable to leave the dishwasher door open. It is advisable to replace the tank water by refilling the tank at least every 20 wash cycles, or twice a day.
Water from the previous day has not been replaced stops and draws water The tank water temperature is too high Faulty pressure switch The overflow tube is incorrectly positioned MODEL UC50e INSTALLATION & OPERATION MANUAL Rev. 1.00 Operatation SOLUTION On-Off push button Turn on...
Need help?
Do you have a question about the UC50E and is the answer not in the manual?
Questions and answers