Receiver Relay Mode; Latch Mode; One Shot Pulse Mode - E.T. Systems Drive 500 User Instructions

Basic operating
features
With receiver relay mode selected, the auxiliary relay will operate in exactly the same way as a single channel receiver would, whenever a transmitter
button programmed into the "Relay" receiver function is pressed and released.
Momentary relay trigger.
Momentary relay trigger.
Action
Momentary relay trigger.
Relay timer times out.
The transmitter must be released and pressed again to reactivate the relay each time.
Action

One shot pulse mode.

The transmitter must be released and pressed again to reactivate the relay each time.
0
0 sec.c.
Auxiliary relay modes.

Receiver relay mode.

Latch mode.

Auxiliary relay
switches on.
Auxiliary relay
switches off.
Auxiliary relay
No buzzer tones.
switches on.
Auxiliary relay
No buzzer tones.
switches off.
18
Response
ON
No buzzer tones.
Com
OFF
No buzzer tones.
Com
Response
ON
Com
OFF
Com
N/C
N/O
N/C
N/O
N/C
N/O
N/C
N/O