Courtesy Light Mode - E.T. Systems Drive 500 User Instructions

With courtesy light mode selected, the auxiliary light will switch on as the gate begins opening and remain on for the programmed light on time after
the gate has closed.
The auxiliary relay can also be triggered to switch on without the gate opening by simply pressing and releasing any remote button programmed into
the auxiliary relay function of the receiver.
The relay on time for the two different triggers can be programmed to different on times if wanted.
Below is an example of courtesy light mode when standard BT mode is active.
Action
Momentary BT trigger.
Gate reaches open
position.
Momentary BT trigger.
At full closed position.
After relay on timer
timeout.
If the gate is closed and any remote button programmed into the auxiliary relay function is pressed momentarily,
Auxiliary relay status
OFF
Momentary
N/C
auxiliary relay
trigger.
Com N/O
ON Momentary
N/C
auxiliary relay
trigger.
Com N/O
Auxiliary relay modes.

Courtesy light mode.

Gate closed.
Auxiliary relay
activates.
Gate begins
opening.
Gate stops.
Gate begins
closing.
Gate stops.
Relay on timer
begins counting
down.
0
Auxiliary relay
deactivates.
0 sec.c.
the following will occur.
Action
Auxiliary relay
switches on for
programmed
time.
Auxiliary relay
switches off.
Response
No buzzer tone.
No buzzer tone.
No buzzer tone.
No buzzer tone.
No buzzer tone.
Response
No buzzer tone.
No buzzer tone.
17
Basic operating
features
ON
N/C
Com N/O
0
3 Min.
OFF
N/C
Com N/O
0
ON
N/C
1 hour.
Com N/O
OFF
N/C
Com N/O