Simple Auto-Close Mode - E.T. Systems Drive 500 User Instructions

The BT functions are the primary full gate opening functions for motor vehicle access.
There are two ways of activating the "BT" functions on this control card. Either via the hardwired BT input or the BT receiver channel.
Simple auto-close mode functions exactly the same as standard mode except that the gates will close automatically after the programmed BT au-
to-close timer has timed out.
In this mode you have access to the following advanced features: - Holiday lock-out and Party mode.
NB! For any auto-close feature to work, a pair of safety infra-red beams must be installed and functioning correctly. If no safety infra-red beams are
installed then the gates will open but not close again.
Action
Momentary BT trigger.
At full open position.
Momentary BT trigger
or auto-close timer
timeout. Safety beam
input not triggered.
Momentary BT trigger.
Momentary BT trigger.
Momentary BT trigger
or auto-close timer
timeout. Safety beam
input not triggered.
At full closed position.
"BT" Button triggers.

Simple auto-close mode.

Gate closed.
0
20 sec.
0
20 sec.
Gate begins
No buzzer tones.
opening.
Gate stops. No buzzer tones.
Gate begins
No buzzer tones.
closing.
Gate stops and
immediately
No buzzer tones.
starts opening
again.
Gate stops. No buzzer tones.
Gate begins
No buzzer tones.
closing.
Gate stops. No buzzer tones.
9
Basic operating
features
Response
STOP