Table of Contents
Advertisement
In a case where the gate is physically lifted off its track and forced open, the alarm output will immediately activate. The alarm will only reset when
the gate is returned to normal secured condition in the closed position.
Action
Gate secured in the
closed position.
Standing by.
Attempt to lift gate off
track and force open.
Gate resecured in
the closed position.
Standing by.
Description
Static off.
Flashing slow 1
second on and 1
On
second off.
1 sec 1 sec 1 sec 1 sec 1 sec 1 sec 1 sec 1 sec 1 sec 1 sec
Static on.
2 x 500ms flashes
followed by a 2
On
second pause.
4 x 500ms flashes
followed by a 2
On
second pause.
5 x 125ms second
rapid flashes each
On
time a trigger is
received.
Gate forced open alarm.
Alarm output
remains in
standby status.
Alarm output
activates.
Alarm output
returns to
standby.
Status LED indications and buzzer guide.
Visual confirmation
O
O
On
O
On
O
On
On
O
On
O
On
O
On
Pause
O
On
O
On
O
On
O
On
O
On
O
On
Built in buzzer sounding is
optional.
None
None
O
On
O
None
1 x 1 second beep
every 15 seconds for
O
Pause
5 minutes after last
gate transaction.
None.
O
Pause
Mimics LED.
O
On
O
23
Advanced features
Response
On/o ...
Buzzer
Gate fully closed.
Gate running normally.
Gate open.
AC mains off. Restore AC as soon as
possible.
Battery low. Allow at least 8 – 10hr
uninterrupted charge before checking
again.
A lock-out mode is active. Press and
release any holiday lock-out button fol-
lowed by any BT button, to deactivate.
O
On
O
Reason
Hide quick links:
Advertisement
Table of Contents
