Table Of Contents - E.T. Systems Drive 500 User Instructions

Page 3 Be Safe! Instructions, warnings and obligations.
Page 4 Technical Specifications.
Page 5 How To Use The Manual Override.
Page 6 Collision Sensing And Safety Overload Routines.
Page 7 Safety Infra-Red Beams Function. All modes except P.I.R.A.C. auto-close mode.
Page 8 "BT" Button triggers - Standard mode.
Page 9 "BT" Button triggers - Simple auto-close mode.
Page 10 "BT" Button triggers - Condominium auto-close mode.
Page 11 "BT" Button triggers - P.I.R.A.C. auto-close mode.
Page 12 "PED" Pedestrian trigger. With no safety beams installed.
Page 13 "PED" Pedestrian trigger. With safety beams installed.
Page 14 "Loop" trigger.
Page 15 Auxiliary relay modes - Strike lock mode.
Page 16 Auxiliary relay modes - Magnetic lock mode.
Page 17 Auxiliary relay modes - Courtesy light mode.
Page 18 Auxiliary relay modes - Receiver relay mode.
Page 19 Positive close mode.
Page 20 Holiday lock-out mode.
Page 21 Auto-close override/party mode.
Page 22 Tamper alarms.
Page 23 Status LED indications and buzzer guide.
Page 24 Warranty.
For any assistance with this product, which is not covered in this manual, please contact your service provider/installer.
Contact details of service provider/installer:
Company name:
Technician:
Contact number:
Email address:
Date of installation:
Introduction.
Operating mode definitions and examples.
Troubleshooting.
2
Company stamp: