Receiver Relay Mode; Latch Mode; One Shot Pulse Mode - E.T. Systems Drive 500 User Instructions

Basic opera ng
features
With receiver relay mode selected, the auxiliary relay will operate in exactly the same way as a single channel receiver would, whenever a transmi er
bu on programmed into the "Relay" receiver func on is pressed and released.
Momentary relay trigger.
Momentary relay trigger.
Ac on
Momentary relay trigger.
Relay mer mes out.
The transmi er must be released and pressed again to reac vate the relay each me.
Ac on

One shot pulse mode.

The transmi er must be released and pressed again to reac vate the relay each me.
Auxiliary relay modes.

Receiver relay mode.

Latch mode.

Auxiliary relay
switches on.
Auxiliary relay
switches off .
Auxiliary relay
No buzzer tones.
switches on.
Auxiliary relay
No buzzer tones.
switches off .
18
Response
No buzzer tones.
No buzzer tones.
Response