Courtesy Light Mode - E.T. Systems Drive 500 User Instructions

With courtesy light mode selected, the auxiliary light will switch on as the gate begins opening and remain on for the programmed light on me a er
the gate has closed.
The auxiliary relay can also be triggered to switch on without the gate opening by simply pressing and releasing any remote bu on programmed into
the auxiliary relay func on of the receiver.
The relay on me for the two diff erent triggers can be programmed to diff erent on mes if wanted.
Below is an example of courtesy light mode when standard BT mode is ac ve.
Ac on
Momentary BT trigger.
Gate reaches open
posi on.
Momentary BT trigger.
At full closed posi on.
A er relay on mer
meout.
If the gate is closed and any remote bu on programmed into the auxiliary relay func on is pressed momentarily,
Auxiliary relay status
Momentary
auxiliary relay
trigger.
Momentary
auxiliary relay
trigger.
Auxiliary relay modes.

Courtesy light mode.

Gate closed.
Auxiliary relay
ac vates.
Gate begins
opening.
Gate stops.
Gate begins
closing.
Gate stops.
Relay on mer
begins coun ng
down.
Auxiliary relay
deac vates.
the following will occur.
Ac on
Auxiliary relay
switches on for
programmed
Auxiliary relay
switches off .
No buzzer tone.
No buzzer tone.
No buzzer tone.
No buzzer tone.
No buzzer tone.
No buzzer tone.
me.
No buzzer tone.
17
Basic opera ng
features
Response
Response