DeVilbiss KK-5058-2 Service Manual

Gun repair kit, waterborne compatible, this repair kit can be used on all gti guns, all exl guns, all plus guns and all pri guns

SERVICE MANUAL

It is the Customer's responsibility to have all operators and service personnel read and understand this manual.

Contact your local DeVilbiss representative for additional copies of this manual.

READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT.

SI-2-25-33-R1 (6/2018)

KK-5058-2 GUN REPAIR KIT

"WATERBORNE COMPATIBLE"

This repair kit can be used on all GTI guns, all EXL guns,

all PLUS guns and all PRI guns.

IMPORTANT! DO NOT DESTROY

1 / 4

www.carlisleft.com

Table of Contents

Need help?

Do you have a question about the KK-5058-2 and is the answer not in the manual?

Page 1 IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local DeVilbiss representative for additional copies of this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT.
Page 2 Gravity Feed Spray Guns Suction and Pressure Feed Spray Guns See note below See note below Fluid Tip Fluid Tip (Torque to (Torque to 15-20 ft. lbs.) 15-20 ft. lbs.) See note See note below below. Fluid Inlet Adapter (Torque to 20-25 ft. lbs.) NOTE: If the color of these parts is blue or black, Use medium strength thread then the parts marked with a "*"...
Page 3 JGA-4035 PACKING REPLACEMENT SPRAY GUN LUBRICATION GTI-33 BAFFLE SEAL REPLACEMENT INSTRUCTIONS Daily, apply a drop of spray gun lube at 1. Remove Fluid Tip. Needle trigger bearing stud (A) and the stem of air 2. Remove Baffle (6). valve (E) where it enters air valve assembly. 3.
Page 4 For specific warranty information please contact Carlisle Fluid Technologies. Carlisle Fluid Technologies is a global leader in innovative finishing technologies. Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice. DeVilbiss , Ransburg , ms , BGK , and Binks ®...