DeVilbiss GTi Operation Manual
Gti series gravity spraygun
Hide thumbs
Also See for GTi:
- Operation manual (29 pages) ,
- Operation manual (9 pages) ,
- Operation manual (29 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeVilbiss GTi
Summary of Contents for DeVilbiss GTi
- Page 1 SB-E-2-360-J OPERATION MANUAL GTi —Gravity Spraygun P 1 - 8 © ITW Ltd 2000...
-
Page 2: Declaration Of Conformity
Operation Manual GTi – Gravity Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment Description This product is suitable for use with both waterbased and solvent based coating materials. The design uses EPA compliant atomising technology to reduce overspray and improve coating efficiency. -
Page 3: Fire And Explosion
SAFETY WARNINGS Gloves must be worn when Fire and explosion spraying cleaning Solvents and coating materials equipment highly flammable combustible when sprayed. ALWAYS Training – Personnel should be given refer to the coating material suppliers adequate training in the safe use of instructions COSHH sheets... -
Page 4: Parts List
Baffle & Seal GTI-425-K Baffle Seal - Kit of 5 GTI-33-K5 Packing GTI-439-K2 Spreader Valve GTI-404-K Stud and Screw GTI-408-K5 Needle (for GTI-214 Tip) GTI-420-K Needle (for GTI-213 Tip) GTI-413-K Spring and Pad GTI-409-K5 Bushing GTI-402-K Seal kit of 5 JGS-72-K5... -
Page 5: Specification
Specification Air supply connection - Universal BSP and NPS Maximum static inlet pressure - = 9 bar (130 psi) Nominal gun inlet pressure with gun triggered - 2 bar (29 psi) Gun Weight - 580 g Materials of Construction Gun body Anodised Aluminium Nozzle Stainless steel... -
Page 6: Installation
Installation 1. Attach air hose to connector (13). Important: To ensure that this equipment reaches you in first class Recommended hose size 8 mm condition, protective coatings have bore. 2. Air supply should be filtered and been use. Flush the equipment regulated. -
Page 7: Replacement Of Parts
Accessories Spanner – order SPN-5 Cleaning Brush – order 4900-5-1-K3 Service Kit – order GTi-416 add nozzle size as required (i.e. GTi-416-14) Pressure gauge Attachment – order GA-515 Gun Mounted Regulator – order DVR-501 Lubricant - order GL-1-K10 © ITW Ltd 2000... - Page 8 ITW Finishing Systems and Products Ringwood Road, Bournemouth, BH11 9LH, England. Tel. No. (01202) 571111 Telefax No. (01202) 581940, Website address http://www.itweuropeanfinishing.com ITW Oberflächentechnik GmbH & Co. KG Justus-von-Liebig-Straße 31 63128 Dietzenbach Tel (060 74) 403-1 Telefax: (060 74) 403300 Website address http://www.itw-finishing.de ITW Surfaces Et Finitions 163-171 avenue des Auréats B.P.