About This Manual; Copyrights; Trademarks; General - ABB COM600 Station Automation Series User Manual

1MRS756566
1.
1.1.
1.2.
1.3.
COM600 Station Automation Series
User's Guide

About this manual

Copyrights

The information in this document is subject to change without notice and should not be
construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any
errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB Oy
be liable for incidental or consequential damages arising from use of any software or
hardware described in this document.
This document and parts thereof must not be reproduced or copied without written per-
mission from ABB Oy, and the contents thereof must not be imparted to a third party
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Copyright 2006 ABB. All rights reserved.

Trademarks

ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.

General

This manual provides thorough information on the DNP3.0 OPC Server and the central
concepts related to it. You will find instructions on how to configure DNP3.0 OPC Server
related objects. The basic operation procedures are also discussed.
Information in this user's guide is intended for application engineers who need to con-
figure the OPC Server.
This user's guide is divided into following sections:
Introduction
This section gives an overview of the DNP3.0 OPC Server and its features.
DNP 3.0
LAN/WAN Master
(OPC) 3.2
7