Firmware Update - Lectrosonics Digital Hybrid Wireless SSM Instruction Manual

Firmware Update

Updating the firmware is a simple matter of downloading
a utility program and file from the website and running
the program on a Windows operating system with the
transmitter connected to a computer via the USB port.
Go to www.lectrosonics.com/US. In the top menu, hover
the mouse over Support, and click on Wireless Support.
On the right-hand-side Wireless Support Menu, choose
Wireless Downloads. Choose your product (SSM), then
choose Firmware.
Step 1:
Begin by downloading the USB Firmware Updater Pro-
gram.
Rio Rancho, NM
Micro Body Pack Transmitter
Step 2:
Next, test the Updater by opening the icon:
driver opens automatically, proceed to Step 3.
WARNING: If you receive the following error, the
Updater is not installed on your system. Follow the
TROUBLESHOOTING steps to fix the error.
TROUBLESHOOTING:
NOTE: This website, http://www.ftdichip.com/
Drivers/D2XX.htm, is not associated with
Lectrosonics.com. It is a third party site used
only for D2XX drivers currently available for
Lectrosonics' devices' upgrades.
If the
If you receive
the FTDI
D2XX error
shown above,
download and
install the
driver by
clicking on
this link.
Then click
here to down-
load.
15