Setting The Ip Address On A Windows Pc - FLIR FC-Series S Installation Manual

2 Basic Operation and Configuration
time for the camera to recover. The amount of time needed for recovery will depend on how long the
camera was exposed to the sun. The longer the exposure, the longer the recovery time needed.
2.7
To set the computer IP address in Windows, first connect the PC to a switch, or connect it to the
camera and ensure the camera has power.
Step 1
427-0073-0012-12 Version 100
Figure 2-4: Images facing sun from standard camera (left) and thermal camera (right)

Setting the IP address on a Windows PC

With the PC or laptop connected to the switch (or if back-to-back with the camera, with the
camera powered on), open the Control Panel, Network and Sharing Center (a Windows 7
example is shown). The connection to the camera should show in your Active Networks.
April 2014
Click to select
2-19