Daikin EWWQ-AJYNN Service Manual page 107

ESIE07-05
1.5 Copy Software from WinLoad32 to the Software Key
Optional: Carel RS Converter (software Winload + drivers: are available on intranet)
■
■
■
■
■
■
■
■
Part 3 – Troubleshooting
2
Switch off the pCO and remove the "expansion memory" cover with a screwdriver (see "Copy from
pCO² to the Software Key" on page 3–5/Fig. 1)
Set the key selector on
Insert the key in the corresponding pin connector as shown. (see "Copy from pCO² to the Software
Key" on page 3–5/Fig. 2)
Prepare the connection for downloading the program for WinLoad32. (see also previous chapter)
2
Supply power to the pCO (check the red LED on the key
Make the upload
Once finished, switch off the pCO
Now the key has the program transferred from WinLoad32.
Procedure for Software Upload/Download
2
(from key to pCO )
2
, remove the key and put the cover in its place.
is on)
1
3 3
4
5
3–21