Fcc Compliance - Motorola MVME712M Installation And Use Manual

Transition module

Hide thumbs Also See for MVME712M:

Table of Contents

FCC Compliance

This VMEmodule (MVME712M) was tested in an FCC-compliant

chassis, and meets the requirements for Class A equipment. FCC

compliance was achieved under the following conditions:

For minimum RF emissions, it is essential that the conditions above

be implemented; failure to do so could compromise the FCC

compliance of the equipment containing the modules.

Shielded cables on all external I/O ports

Cable shields connected to earth ground via metal shell

connectors bonded to a conductive module front panel

Conductive chassis rails connected to earth ground; this

provides the path for connecting shields to earth ground

Front panel screws properly tightened

Specifications

1-5

Table of Contents